Products

Below is a list of just some of the products we carry. If you need something that you do not see listed here, please feel free to fill out our contact sheet and someone will get back with you as soon as possible.

Tool Steel (Plates: rounds & flats)

• A-2 (484)
• D-2 (610)
• 4140/4150 Pre-Hard
• S-7
• A-6 (Vega)
• H-13
• o-6
• Cpm Products (Power Melted Steel)
• M-2 Speed Star
• M-1
• P-20
• O-2 Stenor
• RDS

Flat Ground

• O-1: a.On-sized b.Over-sized
• A-2: a.Over-sized b.On-sized
• 4142: On-sized
• S-7: Over-sized
• A-6: a.Over-sized b. On-sized
• D-2: a.On-sized b. Over-sized
• O-6: On-sized
• Low Carbon: On-sized

Stripper Plate- Low carbon and stress relieved plates. Ground to the following tolerences: thickness +/- .003, width +/- .005, length 60". Available in thickness 1/4" thru 2" and widths 4" thru 16".

Drill Rod

• W-1
• O-1
• A-2
• S-7
• D-2
• M-2
• H-13

Ball Bearing Die Sets

Standard Die Sets

Springs - Associated Spring Raymond

• Die Springs (inch & ISO)
• Compression Springs
• Extension Springs
• Belleville Spring Washers
• Spring Cages
• Nitrogen Gas Springs and Accessories
• Disposable Mini Nitrogen Gas Springs
• EDM Wire
• Copper and Brass Electrodes
• Watter Nozzles
• Wire Guids
• Power Feed Contacts

Spring Loaded Devices - Vleir (Available in Steel and Stainless Steel)

• Spring Plungers
• Ball Plungers
• Quick Release Plungers
• Leveling Pads
• Torque Thumb Screws
• Tooling Componets
• Jigs and Fixtures

Screws and Dowels

• Dowel Pins
• Socket Head Flat Head Screws
• Socket Head Cap Screws
• Stripper Bolts (Shoulder Bolts)
• Set Screws
• Allen Nuts

Toe Clamps - Holding Pressure 4000# on Both Types

• X-40: 3/16" x 38" --- 21/64" from the radius to center of hole.
• D-Clamps: 9/32" x 9/16 --- 17/64" from the radius to center of hole.

Sturdy Sleeves

• Square Holed Sleeves
• Hex Holed Sleeves
• Splined Sleeves
• Collet Adaptors
• Thrift-T-Bars

Amcor Tooling Componets

• Plunger Pins
• Pad Retainers
• Stock Lifters
• Pad Retainer Spool - Locking Style
• Pad Retainer Spool - Counter Board
• Pad Retainer Spool - Threaded Style
• Roller Stock Pushers
• Gripper Buttons
• Automatic Stops
• Finger Stops
• Die Stop Pins
• Guage Stops
• Guide Post Oilers

Drill Bushings

• Headless Press Fit
• Headless Press Fit Thin Wall
• Headless Press Fit
• Slip-Fixed Renewable
• Head Type Liners
• Headless Thin Wall Liners
• Round Clamps
• Lock Screws

Eye Bolts Load Centering - Unique load centering action will handel heavy loads safely and quickly and provides true alignment.

Safty Clamps - Will securely lock on any material that will go into the jaw opening. Every clamp is tested to three times its rated capacity.

Rapid Air - Feeding and coil handling equipment and repair parts.

• Press Feeds

Strippits - Are used in conventioal blanking and forming dies in place of other stripping mechanisms. Uniformed stripping pressure is insured with strippits.

• 2", 2 1/2", 3" an 4"

Lamina Products

• Die Bushings
  • Solid Steel
  • Bronzed Plate
  • Solid Bronze
  • Self Lubing
  • Metric
  • NAAMS
• Die Pins
  • Straight
  • Shoulder
  • Demountable
  • MAAMS - Metric
• Ball Bearing Components
  • Retainers
  • Straight Sleeve Bushings
  • Straight Guide Post
  • Clamp Type Demountable Bushings
  • Demountable Guid Post
    
• Wear Plate
  • Solid Bronze (Self Lubing)
  • Solid Steel
  • Self Lubing
  • Metric
• Prybars
  • 20" and 36" Bronze Tip / Heel
• Gibs
  • L-Gibs Bronze Plated
  • L-Gibs Self Lubing
  • V-Gibs Bronze Plate
• Pressure Control Devices
  • Die Springs (inch)
  • Die Springs (Metric Raymond ISO)
  • Utility Springs (Compression and Extension)
  • Urethane Springs, Rods and Sheets
  • Kaller Nitrogen Gas Springs
  • Squeeze Engineered Marshmellow Springs
  • Disc Springs - Schnoor
  • Spool Pad Retainers
• Mold Componets
  • Leader Pins (Inch and Metric)
  • Bushings - Solid Steel, Bronze Plated and Self Lubing (Inch and Metric)
    
• Cams
  • Aerial
  • Die Mounted
  • Bump Cams
• Stock Lifters
  • Heavy Duty
  • Heavy Duty Trail
  • Mini Lifters
• Hydraulics
  • Lamina Hydraulic Motors
  • Heavy Duty Portable Drilling and Tapping Equipment
  • Die Separators
• Machine Bushings
  • Wiper Guide Bars
  • Running Fit Bushings
  • Self Lubing - Inch and Metric

Unikix Springs - A simplified slug ejection system. merely cut spring and pin to suit application.

• GP-20
• GP-26
• GP-41
• GP-55
• GP-86
• GP-148

Heat Treat Wrap Thermafoil - Stainless Steel Foil Wrap used for uniform heat treating of your steel.

• 50' 2000 degree
• 100' 2000 degree
• 50' 2200 degree super
• 100' 2200 degree super

Shim Stock - Shop - Aid

• Steel Shim Stock
  • 6" x 100' rolls .001-.031
  • 12" x 120" rolls .001-.031
  • 6" x 180" rools .001-.031
  • 6" x 25" Flat Packs .12, .015, .020, .025, .031
  • Metric 150 mm x 2.50 meters .05 mm - .80 mm
• Stainless Shim Stock
  • 6" x 50" rools .005 - .031
  • 12 x 50" rools .001 - .031
  • Flat Packs 6" x 25"
  • Metric 150 mm x 1.25 meters .05 mm - .80
• 1/2 Hard Stainless Steel Shim Stock
  • 12" x 50" rolls .003 x .025

Die Grease Dieco

• 8 oz.
• 1 lb. Cartridges
• 30 lb. Pail

For More information about these and other products we may carry please use our contact form.

Back to Top